Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a straightforward process that can be completed in just a few actions.

• Initially ensuring your red dot sight is powered on.
• Find the small button for reset on the side of the unit.
• Employ a thin tool to activate the reset button for approximately three seconds.
• Release the reset button and your Holosun EPS Carry Red Dot sight will power cycle.
• Its red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun get more info EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, find the tiny button on the rear of your optic. Then, press and hold it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now returned to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Press and hold the power button for approximately 10 seconds.
• An indicator will flash, indicating that the reset is being performed.
• Stop pressing the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and test your sight's functionality. If you encounter any further difficulties, don't hesitate to contactHolosun's customer support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• Beginning with, Turn on your Holosun EPS Carry by pressing the power button.
• Subsequently, press and hold both the mode button and the up/down adjustment button simultaneously.
• During continue holding these buttons, tap the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Factory reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reinitialize your Holosun EPS Carry through a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will return your sight to its initial settings, clearing any altered configurations you've made. To perform this reset, follow these simple steps:

• To begin, identify the reset button on your EPS Carry.
• Next, press a small object, like a paperclip, to depress the reset button.
• While hold the reset button pressed, activate your EPS Carry.
• The sight will display a message showing that the reset is successful.

Once the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page